China factory Hot sale FZG model industrial vacuum tray dryer bevel spiral gear

Type: Vacuum Drying Equipment
Drying Capacity (kg): 100 kg
Application: Medicine Processing, Chemicals Processing, Food Processing, Foodstuff
Condition: New
Voltage: 220V/380V, Client Local Standard
Power: PENDING
Dimension(L*W*H): PENDING
Key Selling Points: Easy to Operate
Warranty: 1 Year
Applicable Industries: Manufacturing Plant, Food & Beverage Factory, Food Shop, Food & Beverage Shops, The pharmaceutical industry
Showroom Location: None
Marketing Type: New Product 2019
Machinery Test Report: Provided
Video outgoing-inspection: Provided
Warranty of core components: 1 Year
Core Components: Bearing, Pump, Gear, Motor, Gearbox, PLC, Engine, Pressure vessel
Weight: 250-2100
After-sales Service Provided: Service Machinery Overseas, Online support, Video technical support, Free spare parts, Field installation, commissioning and training, Field maintenance and repair service
Product name: Hot Air Drying Machine
Name: Industrial Drying Machine
Keywords: Fruit Vegetable Mesh Belt Dryer
Material: 304 Stainless Steel
Usage: Reduce Material’s Moisture
Heating source: Steam
After Warranty Service: Video technical support, Online support, Spare parts, Field maintenance and repair service
Local Service Location: None
Certification: ISO/CE
Packaging Details: Export wooden cases or customized
Port: ZheJiang

Hot sale FZG model industrial vacuum tray dryer
Features
  .Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved;  .The heat source for operation of evaporation may be Iow pressure steam or surplus heat steam;  .The heat loss of evaporator is less;  .Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixing. It is in conformity with the requirement of GMP;  .It belongs to static drier. So the shape of raw material to be dried can not be destroyed. 
Principle
   It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster.Note: if use condensator, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSWJ series hydraulic inject vacuum pump sets, condensator can not be used and the investment could be saved.
Application
 . It is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature.
. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.
 
Typical technical data

Model YZG-600 YZG-1000 YZG-1400A FZG-8 FZG-15 FZG-30 FZG-38
Inner Size of Drying Oven (mm) 600 × 976 1000 × 1527 1400 × 2054 730 ×1200 ×1450 1500 ×1400 × 1220 2200 × High quality Excavator gear parts , EC210B Excavator travel carrier for travel motor gearbox TG gears 1500 × 1500 2200 ×1500 × 1600
Overall Size Of Drying Oven (mm) 1135 × 810 ×1571 1693 × 1190 ×1500 2386 × 1675× 1920 930 ×1380 ×1540 1513 ×1924 × 2060 2400 ×1680 × 2050 2400 ×1680 × 2250
Layers of Drying Rack 4 6 8 8 8 8 10
layer Distance (mm) 81 102 102 122 122 122 122
Size of Tray (mm) 310 × 600 ×45 250 × 410 × 45 400 × 600 ×45 460 × 640× 45 460 × 640 ×45 460 × 640 ×45 460 ×  High quality S seties worm gear motor for sale mechanical lift worm gear screw jack design electric motor reduction gearbox 640 ×45
Drying Tray Number 4 12 32 16 32 64 80
Pressure of Drying Rack Tube (Mpa) ≤ 0.784
Temperature of Drying Rack (ºC) -35 to 150
No-load Vacuum degree within the tank (Mpa) -0.09 to -0.096
Weight of drying oven (kg) 250 800 1400 1680 2100 2850 3200

Company Introduction As the industry chain of machinery manufacturing is being worldwide comprehensively upgraded, the future production operations will be more environmentally friendly, energy efficient and intelligent. CONOVAL insights into the continuous improvement of customers’ demand and we are committed to providing one-stop service for consulting, design, plHangZhou, manufacturing, installation, commissioning, after-sales and follow-up upgrades for customers in the pharmaceutical, chemical and food industries. HangZhou CONOVAL TECHNOLOGY CO., LTD. is a leading manufacture and engineering service provider of pharmaceutical machinery, packaging machinery and other production lines under CONOVAL INC.
Comprehensive and rich product lines
We cover a wide range of production lines including pharmaceutical, chemical, food, etc., providing customers with comprehensive product selection. Relying on the complete production lines, we have accumulated rich experience through years of profound understanding of the pharmaceutical, chemical, and food fields, providing customers with superior industrial chain solutions.

one-stop service
consulting, design, plHangZhou, manufacturing, installation, commissioning, after-sales
 

  • International high quality certification product chain
  • Solid technical support and after-sales service
  • Uphold the principle of “Customer Supreme”
  • Exports to more than 20 countries and regions, good customers feedback
  • One-stop service, customized exclusive project feasibility report
  • Related Products Our Service Act as a good adviser and assistant of clients to enable you get rich and generous returns on your investments.Pre-sale service1. Introduce the product to the customer in detail, answer the question raised by customer carefully;2. Make plans for choice according to the needs and special requirements of users in different sectors.Selling service1. Ensure product with high quality and pre-commissioning before delivery;2. Delivery on time;3. Provide full set of documents as customer’s requirements.After-sale serviceProvide considerate services to minimize clients’ worries.1. Assist clients to prepare for the first construction scheme;2. Install and debug the equipment;3. Train the first-line operators;4. Examine the equipment;5. Take initiative to eliminate the troubles rapidly;6. Provide technical support;7. Establish long-term and friendly relationship. Packaging Our Company As the industry chain of machinery manufacturing is being worldwide comprehensively upgraded, the future production operations will be more environmentally friendly, energy efficient and intelligent. CONOVAL insights into the continuous improvement of customers’ demand and we are committed to providing one-stop service for consulting, design, plHangZhou, manufacturing, installation, commissioning, after-sales and follow-up upgrades for customers in the pharmaceutical, chemical and food industries. HangZhou CONOVAL TECHNOLOGY CO., LTD. is a leading manufacture and engineering service provider of pharmaceutical machinery, High torque low backlash servo motor planetary gearbox reducer packaging machinery and other production lines belongs to CONOVAL INC.

    Spiral Gears for Right-Angle Right-Hand Drives

    Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
    Gear

    Equations for spiral gear

    The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
    Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
    The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
    This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
    The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
    The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
    Gear

    Design of spiral bevel gears

    A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
    A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
    The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
    In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
    The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
    Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
    Gear

    Limitations to geometrically obtained tooth forms

    The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
    Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
    During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
    The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
    The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
    As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.

    China factory Hot sale FZG model industrial vacuum tray dryer     bevel spiral gearChina factory Hot sale FZG model industrial vacuum tray dryer     bevel spiral gear

    Bevel Gear

    As one of the bevel gears manufacturers, suppliers, and exporters of mechanical products, We offer bevel gears and many other products.

    Please get in touch with us for details.

    Mail:[email protected]

    Manufacturer supplier exporter of bevel gears.

    Recent Posts